Stronger than expected and printed fine in PLA the first time with no issues.

Setting the "Print sequence" to "By object" is a *much* better way to print the inner and outer spirals in different colors (the "Print sequence" setting is on the "Prepare" tab, "Other" tab of settings, "Special mode" section). The two objects also need to be moved farther apart to avoid interference. The model printed out great and has been a big hit.

Great fidget toy! Lots of potential extensions too.

Having all of the tools connected works for my organizational style. The extra attached tools did not interfere with their utility during actual use.

The print worked alright, however, the PLA I used left the lines a bit wavy.

Worked flawlessly for my intended purpose - holding corded zipper pulls together to discourage pickpockets. I looped the zipper pull cords together onto one of these carabiners and then clipped the carabiner to a nearby strap on the backpack. It keeps the zippers closed. To print a bunch of them with the gate and body in different colors, in Bambu Studio make multiple copies of the model on one plate then arrange the gate objects together in one area of the plate. Select all of the gate objects, right click, then group the gates together into one object. Similarly, arrange the bodies into another non-overlapping area of the plate, select all of them, right click, group the gates into another object. Select the color for the gates object and another color for the bodies object. The key final step is to select "Print By Object" to have just one color change during the print. See https://www.reddit.com/r/BambuLab/comments/1e9z0j1/comment/lentb3j/

An iPhone 13 Pro in an Apple leather case fits well and the rounded corners on the "clamp" piece enable easy removal.

Printed in PLA with no issues and it's now holding the PETG that will be used for another print.