Very cool useful gauge. I printed mine out of PETG. Thanks!

I printed new ones out of PETG because I gonna use Sunlu AMS Heater soon. I like the redesigned back containers.

Printed mine out of Sunlu PETG entirely. I didn't play with colours because I just wanted to give it a try. Very interesting mechanism and I probably gonna do similar in my project. Thank you!

Really beatiful design. I was searching other makes for the color scheme to choose the right one. It was the gift for my neighbour so I wanted the three to looks special. Filaments I used: 1. Pot - Sunlu PLA HS Marble Oreo and Sunlu PLA+ Silk Light Gold, 2. Soil - Bambu Lab PLA Basic Black, 3. Trunk - Sunlu PLA Walnut Wood, 4. Foliage - Sunlu PLA+ 2.0 Olive Green. One of the foliage haven't the holes deep enough for stable placement so I used 2mm drill and made them deeper then was perfect. To join foliage with trunk and trunk with soil I used CA gel glue and after the drying everything was perfectly stable. I decided to not use glue between pot and soil because tight fit was enough for me.

Interesting design. It's really handy just to open the wedge and it's done. Temperature stays well inside the chamber and humidity drops better. Personaly I would make it more curved so it would fit the rounded area a bit better.

I tried different profile with 200C nozzle and higher speed but I wasn't happy and I though it's too cold and too fast for Sunlu TPU. I tried your profile and the quality of the surface got better but I noticed higher oozing so I checked the retraction difference between 2 profiles and I noticed you using 2mm retraction which was too much for me and I changed it to 1mm and it almost eliminated the oozing. The order of prints on my photos are: from the left my old profile, middle yours and on the right yours but with 1mm retraction which looks better.

I've made mine out of Sunlu PETG Transparent. I was searching for clip that doesn't interfare with filament dryer while rotating the spool and this one does the job.

I've printed mine out of Sunlu PETG Transparent and Black. Wow! What a great Project! No screws, no special parts. Just 3D print. I like it! The threads works fine for me. There's little play from side to side so 16.2mm migth be to wide for my caliper but I can decrease that.

Thank you! This test helped me understand the specifics of my material.

I've made mine out of Sunlu PLA+. They work as intended. Thank you!

I've made mine out of Sunlu PETG Transparent. I needed to loose some elements using pliers and hook tool. I know very well the tolerances may fuse some elements during the print but it's totally normal and natural for me. No problem at all. I've use a bit of silicone spray on the bearings and everything works smooth. Great project! Here's the short video I made: https://youtu.be/4dzKDc5tX7U

It is almost impossible to see layers lines. I made mine out of Sunlu PLA+. Quality print.