GM328 Case
Print Profile(1)
Bill of Materials
- GM328 Transistor Tester x 1: https://de.aliexpress.com/item/1005004914474349.html?spm=a2g0o.order_list.order_list_main.17.5e995c5fjYIwhX&gatewayAdapt=glo2deu
- M5 Nuts x 4:
- M3 Srews x 4:
- Banana Sockets Red x 6:
- Banana Sockets Black x 1:
- 9V Batterie Clip x 1: https://de.aliexpress.com/item/1005006354298344.html?spm=a2g0o.productlist.main.1.63d11aeeebwGij&algo_pvid=606043d5-6bc6-4780-bf66-ab700325fb81&algo_exp_id=606043d5-6bc6-4780-bf66-ab700325fb81-0&pdp_npi=4%40dis%21EUR%212.46%211.35%21%21%2118.28%2110.04%21%40211b431017353337003597244eccbd%2112000036865970721%21sea%21DE%214719643488%21X&curPageLogUid=P24xEpuMIkPH&utparam-url=scene%3Asearch%7Cquery_from%3A
Description
If you are looking for a housing for the GM328 transistor tester that supports all functions,
then this model is the right one!
Waht it can do:
Test Transistors, Mosfets, IGBTs, Diodes, Resistors, LEDs, Inductors, Capacitors, TSOP4348, DHT11 in THT or SMD also has banana sockets
Gernerate 10-Bit PWM, squre wave, frequenzy counter, measuring voltage with a banana socket input
More info about the GM328 can be found at the aliexpress page!
Assembly instructions:
Step 1: Remove the supplied PCB spacers (see picture)
Step 2: Solder the 9V clip to the circuit board (see picture)
Step 3: Solder all test contacts to the banana sockets and mount them (see picture)
Step 4: Connect the 9V block to the clip and insert it into the housing (see picture)
Step 5: Assemble everything and use 4x M5 nuts as spacers
The housing is still in version 0.9 so not 100% finished but works perfectly!
Boost Me (for free)
Thank you very much :D
Your support helps me to realize more projects like this!
License
Comment & Rating (2)