Bamboo Sword - Cub

Stress relief toy made based on Bamboo Sword and Excalibur.

Requires AMS multi-color printing, glue is needed for assembly. You can choose to install an animal head or a Tai Chi rotor at the end of the hilt (for details, see video BV1zu4y1g7Sp).

The blade needs three 5/3 (diameter/thickness) magnets, and the scabbard needs six 5/4 (diameter/thickness) magnets. This is the maximum magnet size, you can also put in smaller magnets.

The materials I used are EasySilk and luminous filament. It is recommended to use transparent or translucent filament for position 1 gray filament. If you don't have such filament, you can rotate the patch by 180 degrees and add a chamfer to the top edge.

If the blade gets stuck in the inner structure, there is no need to polish it, just insert and pull out multiple times to solve the problem.