BambuLab AMS Silica Gel Box With Mi/Xiaomi Hygrometer - Full Set

BambuLab AMS Silica Gel Box With Mi/Xiaomi Hygrometer - Full Set of 5 boxes

The project comes pre-oriented on the build plate. No supports are required when printing the pieces.

The hygrometer/thermometer just clicks in place. You can connect it to bluetooth and use it with Xiaomi Home app.

If you want an accurate reading do not fill with silica the central one with the sensor.

---------------------------

It's available a variant of this model that use a different hygrometer sensor.

You can find it here:

BambuLab AMS Silica Gel Box With Hygrometer - Full Set

----------------------

Hardware:

• You will need this hygrometer

The plates are divided by box type:

• 01 - One large central box with humidity sensor/thermometer
• 02 - Two large boxes
• 03 - Two small boxes for the sides (optional)

Assembly Istruction

• Insert the side panels into the central box by sliding them into the grooves
• slide the cover on the panel tracks until it bottoms out

---

N.B. Do not remove the Object Modifiers from the plate 03