MewTwo
Print Profile(1)
Description
Boost Me (for free)
A boost a follow a like a comment they all help. Thank you
All of the prints I print to make sure they look good. Some of the times with hue forge they can come out a little discolored because of the transmission distance. I would strongly recommend the colors that I am using to really get the best effect.
They are 200x200 and fit standard frames. Allot of my prints are thicker and don’t really need a frame for them. I just usually print a hanging tab for the back and glue it on.
All instructions are included
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.8mm
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA PolyTerra Muted Purple Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Muted Purple
At layer #15 (1.28mm) swap to Jade White
At layer #16 (1.36mm) swap to Muted Purple
At layer #20 (1.68mm) swap to Jade White
At layer #22 (1.84mm) swap to Muted Purple
At layer #26 (2.16mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)