M5stack Unit CardKB Case
Print Profile(1)
Description
Front Image
Bottom Plate Image
waveshare rpi2040 zero and Unit CardKB v1.1 Assembly
Snap the two components into the base plate, solder the wires according to the wiring order. Note that the HY2.0-4P connector of Unit CardKB v1.1 needs to be removed because it is too thick.
The rpi2040 mounting plate can be glued. If you need to remove it, destructive disassembly is fine, as printing another one doesn't take long.
The flat cable needs to be trimmed as needed after debugging. The one used in the figure is the waveshare esp32s3 zero (using this module requires reducing the bottom by 0.5mm for the module to be properly installed).
ESP32 Compatibility Diagram
# Button Assembly Diagram
Snap the buttons into the C-side, then put them together and tighten the screws, all using Bambu Lab BT2*6 self-tapping screws.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)