Lubricator

🖊️ Lubricator — The oiler your Bambulab finally deserves

Because maintaining your printer shouldn't feel like a chore

We've all done the same. A dodgy cotton swab, an ugly syringe, oil-covered fingers... That's over

Lubricator is a precision oiler with an ultra-minimalist design — conceived like an Apple Pencil, designed for your Bambulab. It sits on your desk like a quality object, not a DIY tool

Why you'll love it

✦ Apple Pencil design — sleek, elegant, engraved LUBRICATOR in relief. It's beautiful, period

✦ Surgical precision — a fine Ø2mm tip with integrated oil channel. You apply it exactly where needed, without overflow

✦ Integrated ~5ml reservoir — enough for dozens of maintenance sessions. You fill it, screw it back, and you're good to go

✦ 2 screw-together parts — you unscrew in 4 turns to fill or clean. Simple, clean, clever

✦ Compatible with all Bambulab — X1C, P1S, A1, A1 Mini. X/Y rails, Z lead screw. It reaches everywhere

✦ Zero print support — lay the parts flat on the plate and print. That's all

Print settings

30-second assembly

1. Print the 2 halves flat
2. Pour oil into the back half
3. Screw on the front half (4 turns)
4. Apply to rails or lead screw

💧 Recommended lubricant: PTFE oil or Super Lube for rails · light oil for Z screw

📸 Real photos coming soon

I will post photos of the actual printed model as tests and improvements progress — follow the project so you don't miss anything. Every community feedback helps improve the next version 🙏

If you print it, share your photo — I'd love to see the result ! 🎉

Designed in FreeCAD · Tested on Bambulab · Made with passion for the community