Print Profile(1)
Description
Project: Ghost Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA Basic Blue Gray Transmission Distance: 3
#8c9099 PLA Grey Transmission Distance: 1
#e2dedb PLA White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.
Boost Me (for free)
Wenn dir das Modell gefällt oder dir geholfen hat, freue ich mich sehr über einen kostenlosen Boost. Vielen Dank! 😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)