K2 Plus Vented Riser

This project is a remixed version of the excellent vented LED riser originally created by JesusFreak on Printables for the ****** Centauri Carbon. I’ve always loved the look and function of the original on my CC, so I adapted, scaled, and modified it to fit the K2 Plus. My remix adds the K2 Plus logo beneath the vent slider tab, along with Creality logos on the front corners for a clean, branded finish.

I included multiple logo variations—inset, raised, and plain in the STL / CAD Files—so you can choose the style that fits your build.

Parts Needed

You’ll need:

• 2 short vents (front and rear)
• 2 long vents (left and right sides)
• 4 corner pieces, marked accordingly

I’ve provided individual plates for each part, as well as full plates containing all vents and all corners for convenient batch printing.

Print Details

• Estimated print time: ~15 hours
• Filament usage: ~520 g
• Material: PETG
• Walls: 3
• Infill: 15% Gyroid
• Brim: Used for added bed adhesion
• Supports: Only on the rear corners where LED‑wire cutouts are located

The riser has been extremely sturdy in use. I originally placed my CFS on top without any issues. After adding a second unit, I moved both to the side of the printer, and the riser continues to perform flawlessly. Feel free to adjust walls, infill, or other settings to suit your needs.

Post‑Print Notes

Once printed, you’ll need to free the sliders by pressing on the top and bottom of each vent opening. You may also need to gently press the vent‑control tab to release it—sometimes a light tap in one direction helps everything seat properly.

I hope you enjoy this remix, and please be sure to give JesusFreak on Printables plenty of kudos for the original design that inspired it.