Customizable Soap/Sponge Dish

Circular Soap Dish with Honeycomb Insert – Ideal for Scrub Daddy and More

Updated Aug-01-2025: Added Customizable design. See below for instructions.

Upgrade your sink setup with this stylish and functional circular soap dish tray, specially designed to hold your favourite sponges and soaps. Perfectly sized for Scrub Daddy and similar scrubbers.

This two-part design includes a sturdy container base and a removable honeycomb insert that helps sponges dry faster by promoting airflow and draining excess water efficiently. The elevated drainer keeps your soap and sponges clean, dry, and ready to use. No more soggy messes!

Perfect for kitchen or bathroom use, this freestanding soap dish not only extends the life of your cleaning tools but also adds a sleek, modern touch to your space.

Customizable Design Instructions

For the customizable design print profile, you are able to change the pattern you want in Bambu Studio directly. It makes use of the Infill setting to set the pattern. For this to work, you need to use the provided print profile. 

To customize: 

1. Select the “Inlay-Inner” object and edit the settings for that object. 
2. Under the “Strength” tab, change the “Sparse infill Density” and the “Sparse Infill Pattern”. These two will change what pattern the final inlay will have. There should be no “Top shell layers” and “Bottom shell layers” (set to 0).
3. Go to Slice Plate and check if the design is what you're looking for. I would recommend using an infill density between 5% and 20%, and either the Honeycomb, Gyroid, or Grid patterns (make sure the print connects to the outer edges)
4. Print!

5. Comment with a picture of your customized design! I'd love to see what people made.

    

Examples:

Honeycomb with 10% infill density

Gyroid with 5% infill density

3D Honeycomb with 10% infill density