My basement is damp, and my saw blades used to rust within weeks. I designed this parametric holder to stop that. It features a unique screw-on compartment at the bottom for desiccant or camphor to create a rust-proof micro-climate. The files are set for 15-16cm blades, but you can change the length and diameter in Onshape. It is support-free and keeps your reciprocating or jigsaw blades organized and dry. No more rusty tools!

I wanted the vibe of classic neon and TL tubes but with the power of modern smart home tech. This design uses an ESP8266 D1 Mini running WLED to create a fully customizable neon tube light. The 3D printed parts fit a 30mm acrylic tube, hiding the controller and wiring for a clean, intentional finish. It is easy to print, requires no supports, and brings that perfect digital glow to any desk or wall. Just flash WLED and light it up.

I designed a Print-in-Place standoff to create secret storage behind your pegboard for cables and tools. v2.0 is out! I’ve overhauled the clips to reduce layer stress and prevent snapping. It prints without supports and matches the white board perfectly with Bambu White PLA. Check it out and reclaim your wall space! 🚀

The Math of the Perfect SKADIS Stack 📐 Standard pegboard bins often leave awkward gaps. I wanted a system that actually works with the board’s geometry. I designed these parametric bins on a specific unit system (X=40mm, Y=28.2mm, Z=20mm). Because they are slanted at 45°, the Y-axis unit ensures they are perfectly stackable while mounted! Need a specific size? I've linked the Onshape configurator so you can tweak the dimensions, toggle flat bottoms, or remove shells. 🚀

The Quest for the Perfect A1 Setup 🛠️ I love the A1’s swappable nozzles, but my drawer quickly became a mess of loose hotends. Every Gridfinity holder I found was too tall for my shallow drawers. I decided to fix that. I’ve designed the lowest-profile A1 holder on MakerWorld (only 3 units high!). It fits perfectly, saves space, and has a sleek 2-part inlay for a pop of color without an AMS.

I wanted a small hook for a metal filing cabinet. Since I still had some Neodymium pot magnets lying around, I designed this hook that fastens to those. It uses an M4 countersink bolt and an embedded nut in the part. These are the magnets that I used.

I found myself in need for storage of some flat items like my cutting mat and a notebook. Since there is about 20mm of space behind the Skadis, this is perfect for storing flat items so that they are secure and out of sight, while taking up no additional room. The clip is print in place and is nearly flush with the face of the board.

My fermentation weights have a small handle on top, making it difficult to stack them so they ended up sliding around in a drawer. In order to neatly stack the glass weight, I created this holder. It's made for weights with a diameter of 70mm and will hold 4 weights stacked on top of each other.

Inspired by the HAY Neon Tube LED, I wanted to make something that looked very similar but was capable of RGB color changing and effects. With a D1 Mini and WLED I have created a product that looks very sleek in most decors and offers the flexibility to control the light from WLED's app or other platforms such as Home Assistant.