Foldable bed table

Do you need a small table for your bed, placing your phone or other light stuff? Then you can print this foldable table!

It is designed for the IKEA Neiden bed, which has a frame 18 mm thick. But you can measure your bed frame and select which width supports your bed and just print that single item.
 

Wait for the parts to cool of before assembling the table. Otherwise you might bend the warm parts, especially when attaching the plate to the bed hinge, which requires some force!

Note that the printer profiles are designed to strengthen certain parts which is being stressed when assembling the table.

Also note that when attaching the plate part to the bed hinge, you should push quite hard!

It is 100% printed - no other tools needed!

I am aware that the profile says A1 only, but it can print on all Bambu printers with a plate size 256 x 256. The printers have been checked (except the A1 Mini) but it only shows A1 for some reason! It also works on the X1C, but please use the smaller plate (plate #4) as it uses more space for calibrating etc.

If using the Wall mount (separate print profile), use screws which are max 5 mm in diameter with a head which is max 8 mm (hole is 5,5 mm). Remember to add the Bed hinge to the wall mount before mounting on wall!

Of course beware if placing heavier stuff on the table and do not step on it!