Servo Button Extension Bracket

This stand is specifically designed for 9G servo auto-clickers (Servo button component link: https://makerworld.com/zh/models/2982586-9g-servo-gear-rack#profileId-3346501). It can securely fix the servo, preventing pressing deviation, and is suitable for most pressing scenarios such as mobile phones, keyboards, and instrument buttons. The stand supports height and position adjustment, is easy to install, and has strong versatility, ensuring long-term stable automatic clicking operation of the device

A single extension rod requires two M3x6-M3x10 screws to install the servo component (M3x8 cylindrical hex socket screws are recommended)

The extension rod and base can be secured with M3x10 or M3x12 thumb screws. If they are difficult to purchase, you can directly use the screws for installing the servo to secure them (If you want to use the same type of screws, it is recommended to buy M3x8 screws; only 6 screws are needed to install both servo components, which sacrifices adjustment convenience but reduces expenses and saves you money)

The extension rod extends up to 70mm, enough to cover various products such as mobile phones and keyboards. The center distance of the servo component's mounting holes is 7mm, and any product with this hole distance can be installed

Additionally, if you need to click on a touch device, you will need to attach a conductive sponge to the head of the servo button and connect it to your power supply's GND to enable touch functionality (as shown below)