glasses-2

This is a men's fashionable sunglasses designed by a professional designer.  The structure of each part of the glasses is fully designed and verified. The nose pads of the glasses are designed to adapt to Asian faces, and the tail ends of the glasses legs are thickened to increase the weight of the tail ends and fit the head to prevent them from falling off.It can be 3D printed without supports.There is also no need for any additional metal fittings.The glasses frame has a thickened design, which has higher strength and is not easy to break and can be used for a longer period of time.The glasses frame has a bevel design to increase the three-dimensionality of the face. At the same time, the hinge of the glasses frame has been fully enlarged to prevent breakage. At the same time, no metal screws are needed. You only need to cut a piece of 1.75mm diameter PLA filament to serve as a hinge axis.Of course, metal screws can also be added.The size is suitable for most adult men, the total frame width is 150mm.The temple length is 147mm.The angle between the temples and the frame is 9°.Eyeglass frame size 54□21-145. Assembly instructions: 1. Please cut a piece of PLA filament with a diameter of 1.75mm to serve as a hinge shaft. 2. Please use a hair dryer to heat the middle of the temples, and then bend the temples manually ( Please refer to the top view picture).