Key Manager

🇬🇧 Product description

Keep your keys tidy and stylish with this 3D-printed magnetic wall key holder.
Designed to combine practicality with a clean look, it keeps your keys neatly organized and always within reach.

🔹 Main magnetic mounting:

• Designed to hold 36 neodymium block magnets of the following type: Q-08-04-03-N.
• ⚠️ Important: the polarity of these magnets is critical. If one magnet is placed in the wrong direction, the key holders will not fit properly. Always check polarity before installation.

🔹 Optional – rear magnetic mounting:

• You can add 10 cylindrical magnets of this type: S-05-08-N.
• These are meant to be inserted at the back of the holder, allowing it to attach magnetically to a metallic surface (⚠️ not suitable for heavy keys).

🔹 Screw mounting:

• For stronger installation, two holes are provided for Ø 4.5 mm screws.

🔹 Tight-fit assembly:

• All magnets (block and cylindrical) are designed for a press-fit assembly. They must be pushed firmly into their slots.

✨ Smart magnetic keying (8 key holders)

Each key holder has 4 magnets, matching its slot on the wall support.
By assigning different polarities, each key holder has a unique magnetic code, meaning it can only fit in its designated place.

👉 Example distribution:

• Key holder 1: + – + –
• Key holder 2: – + – +
• Key holder 3: + + – –
• Key holder 4: – – + +
• Key holder 5: + – – +
• Key holder 6: – + + –
• Key holder 7: + + + –
• Key holder 8: – – – +

👉 This way, each key is “coded” and can only be inserted in the right place, preventing any mix-up.

✨ Highlights:

• Optimized design for 3D printing.
• Clear numbering and customizable colors.
• Error-proof system using polarity.
• Flexible installation (magnets or screws).

ℹ️ Please note: Artificial intelligence was used only for writing this text and for removing the background from some photos. The complete design was imagined and created by myself.