HONDA E

Supports are essential! Supports are essential! Supports are essential!

Print in groups for assembly The car body and wheel rims can be printed in different colors according to your preference

Parts such as the car body glass can be hand-painted according to personal preference

The layer height of the car body can be adjusted to personal preference to control the layer texture

============================================================

Note For printing arrangement it is generally recommended to use the author's original design If you have other needs you can adjust the arrangement yourself

============================================================

Coloring tip Lightly engrave first with a carving knife to prevent colors from bleeding along the layer lines

============================================================
When assembling glue can be used for fixation as needed

As shown in the image secure the inner part by passing it through the outer tire and fixing it to the car body (tools may be needed to tap it in) Finally insert the wheel hub molding (it just needs to be flush with the outer tire do not push it in further)

============================================================

Recommended print colors:

Headlights It is recommended to use transparent filament

Taillights It is recommended to use red or transparent red filament

Exhaust pipe It is recommended to use silver or gray filament

Grille section Generally black or silver

Tires Black

Wheel hubs Choose different colors according to personal preference

============================================================

Model dimensions:

Length Generally 10cm floating 1cm front or back based on real vehicle proportions

Width Generally 6cm floating 0.5cm left or right based on real vehicle proportions

Height Varies from 3-6cm depending on the car model

============================================================