beautiful model, printed great on a A1 with Polyterra PLA. I know it should be better in PETG or ABS, but placed on my P2S ( fitted perfectly btw) and did a lot off prints in both PETG & ABS, the poops were fine in this PLA bucket! ps. I used the screws that came with the P2S for the scraper, worked perfectly. Thanks for sharing the model!

absolutely perfect for my AMS 2 Pro, printed in ABS on a P2S. The hydrometer snapped in perfect! I did split up the print into 2 plates, to have the items positioned a bit more freely and to reduce chance failure. To be honest don't know if that was necessary, but printed flawlessly and as a extra perk somehow reduced overall print time a bit (around 30min). Thanks a lot for sharing and boosted for sure!!

gorgeous model and printed perfectly in Bambu metallic green on an A1. my son loves it! thanks sharing!

perfect print, very well designed model. used Polyterra PLA black and looks beautiful. printed on my A1 which fits perfectly, waiting here patiently for my P2S to arrive. Thanks for sharing!!

beautiful model and printed flawlessly.Scaled it down to 86,5% to fit my specific need. Used Polyterra PLA on a A1. Thanks for sharing!

awesome model, printed perfectly on my A1 in Bambu PLA metallic green. thanks for sharing!

awesome model, printed perfectly and works a treat! even holds big boxes. very sturdy. printed on a A1 in Polyterra PLA. thanks for sharing!

gorgeous model! Scaled it down to 65% to fit the need i had for it and worked well! Didn't print the lower separate bottom part as it is for a fake plant for my mother. printed on a A1+AMS in Polyterra PLA. Thanks a lot for sharing!

Absolutely awesome and elegant model! Great balance and holds everything, even a 10inch ipad pro. It is pretty huge in size, but for me that isn't an issue. Didn't try too put rubber feet under it yet, might do that as well. printed on a A1 in Polyterra PLA. Thanks for sharing this beautiful model!

very sturdy model, feels solid! it isn't the most smooth print with a little bit off jagged edges, but that's nitpicking. Feels like it will last through heavy snowball battles :) Printed on A1 in Polyterra PLA+. thanks for sharing (and improving)

good model, printed great. I see people having problems with bed adhesion, no problem here, though I put a couple ears on to the rim. So maybe that kept it in place but probably worked without it also. Printed in PLA+ on a A1, and gonna need it tomorrow morning, is freezing/snowing a lot at the moment!

Great model and printed perfectly. Feels very solid. Am going to use it tomorrow morning as its snowing here like madly lol. Thanks for sharing! printed on a A1 with PLA+

Very well balanced and sturdy stand! Great design and printed perfectly (smooth and fast). We have a lot off different phone stands printed before, but all have some flaws and shortcomings.... this one is the best for stationary use👌 My family has some large phones, like the S25 Ultra, with big cases and they fit perfectly in landscape and portrait stance. Used a A1 with PLA+ Thanks for sharing!

really good model, came out cleanly from the A1 + AMS printed in white PLA. Had to resize it a bit for a children's face, measured off my son, at around 92% reduction. Thanks for the share!

Awesome print and model. Simpel but effective! printed on my A1 and was 1st a bit concerned about the vertical stance while printing, but did it perfectly! put in some foam padding on a couple off spots to make it more comfortable for my son. Thanks for sharing!

Great model! very thin and light but sturdy. was amazed at the size and how fast it printed. done on a A1 with Bambu Orange matte PLA and black PLA. The kids loved it and worked perfectly with all the candy collected in it. Thanks for sharing!

Perfect print and great model! now printing a black mesh for mouth, nose and eyes. Printed on A1 in Polyterra white PLA+.

Very good model, fits well. going to fit mine with felt on the inside. printed in PLA on my A1 and feels sturdy. thanks!

works perfectly! used on 2 rings my wife couldn't wear anymore because they where oval, perfectly round again! used Bambu matte PLA. both rings where decently strong (not bendable by hand) and the printed tools didn't break. Just tap it in gradually and in 2 sessions or more, and used a rubber hammer. thanks for this model!

fine model, fits perfectly on the car tire valves.