Print Profile(1)
Description
This resizer tool can be used to stretch the band of a ring.
Only for rings that have a circular metal band.
Resizing in this way is not recommended if you need to expand the diameter of the ring by more than 1 full US size (~.8mm)
Instructions:
- Print all parts from plate 1 or 2 depending on the starting size of the ring to enlarge.
- Place the ring on the lowest step that it fits snugly (don't force it)
- Make sure the ring is sitting flush
- Insert the wedge
- Tap the wedge a few times with moderate force
- Start with minor changes. You don't want to make it too big!
- Flip the assembly upside-down and place it in the removal jig
- Insert the removal pin into the hole
- Tap the removal pin with a hammer until the wedge slides out
- Check the fit. If it's still too tight then repeat as needed.
Use at your own risk! I don't want to hear about you breaking grandmas heirloom jewelry!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)