Easy print. Works great! Thank you!

Excellent design. Easy to print and use.

The Claymore designs are great! I use the hygrometer and short version with hydrophilic and high $ filaments. They are an excellent supplement to the center spool pods. https://makerworld.com/en/models/151220-cylindrical-desiccant-holder-pouch#profileId-182230 https://makerworld.com/en/models/1083184-silica-mesh-pouch-with-screw-lid#profileId-1075419

Simple, fast to print yet very effective PETG used

Excellent design Using it on a pair of AMS 2 Pro units

Used PETG Very easy to print and assemble. Great design! Used slicer paint function to customize the colors with H2D

Excellent adaptation of a removable lid. Easy to print and use. Thank you I am upgrading my previously printed pods to add this removable lid because it makes reconditioning the silica beads much easier.

Excellent design Thank you!

This design is excellent. It's a derivative from Robert's standard AMS pods which I have been using for several months. Printed in clear PETG. Key features include: 1. Maximized volume for desiccant media 2. Maximized permeability of pod walls including all 6 sides with the right slicer settings eg zero top and bottom layers as needed 3. Minimized filament consumption required 4. Functional lids & funnels Notes: Print time is not quick, but it is comparable to others similar designs. You only need 1 set per AMS 2 Pro, so I found it to be worth the investment.

Great design! Prints and builds easy. Looks and works great. Used PETG with no issues. Thanks for sharing

Easy to print and install. In place for a couple weeks and works great. Thanks for sharing

Excellent design and print profile. Easy to use Bambu Labs flexible feet on the X1C. Recommended.

Excellent design and easy to print. Recommended.

Excellent design and print profile! I used the slicer to reduce the length/volume and employ 2 colors. Easy modification. Thanks for sharing.

Great Desiccant Holders. Permeable on 5 of 6 sides (the primary function of the holder). Can be 6 of 6 if you use the zero top and bottom layer trick when you print them. Fit in the AMS is great. Lids are secure. Wall thickness is just right with PETG (transparent). I have used a few others and these are the best I have seen. Would love to see you make similar ones for the AMS 2 Pro

I have been using one of these for 2 years. Recently realized 'mirror' function would make one for the other side. Great with just one, brilliant with two!

Clever and versatile design. Great job!

Great print profile. I used mouse ears away from where the tube runs to hold them to the bed. Clean print with no sharp edges.

Great little plugs. Different size options allowed easy selection of the best fit. Thanks for this design!

Easy to print and install into H2D. Wish minor seam gaps between halves were removed to better protect the bearing. Not a show stopper. Thanks for this design!