Bambu Lab Reusable Spool Cooler Master Remix Remixed by chameko小廢物電波塔

Remixed by

chameko小廢物電波塔

3D Printer>3D Printer Accessories

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

[Spool&PLA label]0.12mm layer, 2 walls, 15% infill

Designer

10.5 h

3 plates

4.8(94)

[ALL label] 0.12mm layer,PLA ABS PETG

Designer

59 min

1 plate

4.9(8)

ABS - 4.7 Hours Total Print - 0.28mm layer, 3 walls, 15% infill

4.7 h

3 plates

5.0(25)

PLA or PLA+ - 0.2mm layer, 2 walls, 15% infill

6.9 h

3 plates

4.6(17)

Boost

256

478

161

1.5 k

2 k

Released

Description

10/07 Thanks to user_569762197 for providing two beautiful and clear photos!

I saw the Cooler Master show off a new case, and the cut-out design on it was very interesting, and I remixed this

Spool
I followed Bambu Lab's STL archive to remodel in 3D and then worked on Cooler Master's design with other creators' Spools
Combination of cut-out designs.

label
I created a replaceable label, I designed it according to the sticker of Bambu Lab, but I found that the spool sold by Bambu Lab did not match the label position of the STL file, which could lead to a gap of 50~100g.
Therefore, I recommend reducing the gap by not using refills.

The label recommends that the first layer be printed with a width of 0.4mm to improve the clarity of the text.

There are several versions of label, if you don't have the one you need, you can download a blank version to modify.

I have gained a lot in this community and hope that I can also contribute some of my strength.

Comment & Rating (161)

@user_569762197

Print Profile

[Spool&PLA label]0.12mm layer, 2 walls, 15% infill

Imprimí una copia en petg y otra en abs, ambas quedaron impecables con la configuración sugerida, voy a imprimir varios más para tener por las dudas

(Edited)

The designer has replied

@chameko

¡Gracias por tu comentario! ¡Se ve muy hermoso! ¡Mucho mejor que mi foto! ¿Puedo subir tu foto? ¡Esperando tu respuesta!

(Edited)

@user_569762197

Replying to @chameko :

Claro! Puedes utilizar las mías

(Edited)

@Rharve001

Print Profile

ABS - 4.7 Hours Total Print - 0.28mm layer, 3 walls, 15% infill

Nice, thank you!

@user_2270124162

Print Profile

ABS - 4.7 Hours Total Print - 0.28mm layer, 3 walls, 15% infill

printed great! works well too!

(Edited)

@DieterW

Print Profile

[Spool&PLA label]0.12mm layer, 2 walls, 15% infill

Looks very good, unfortunately not compatible with the original bamboo design.

@robw001

Print Profile

[Spool&PLA label]0.12mm layer, 2 walls, 15% infill

Prints very well in PETG, looking beautiful, fits snugly

(Edited)

@user_3158137830

No deformation,and have label. I'll call it best Remix

@mbdonny

Great Design. Has worked perfectly so far. Printed in Bambu Green PETG. Still need to print out the labels, but I'm sure they will print great as well.