Search models, users, collections, and posts
12-key numeric keypad
IP Report
Print Profile(1)
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
17.2 h
2 plates
Open in Bambu Studio
Boost
14
26
1
1
30
9
Released
Bill of Materials
List other parts
- Ardiuno promicro x 1:
- PCB x 1:
- SwitchCherry x 12:
Description
Content has been automatically translated.
A 12-key numeric keypad. The code provides the digits 0 to 9 along with a decimal point “.” and “Enter”.
This model requires a PCB (see Gerber files). Feel free to modify it. You can also forgo it and solder wires according to the diagram.
Twelve CHERRY-type switches and an Arduino Pro Micro board are needed.
Four M2 inserts and four M2x8 screws are required.
The code can, of course, be modified to suit your needs. Note that the encoding and key codes are based on a QWERTY keyboard.
Important! First solder the Arduino pins, then the switches, and finally the Arduino (USB-C connection facing upwards).
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)