Kroduk

cover

hex_basket_2.png

IMG_20240624_202126.jpg

plate_1.png

big_2_2.jpg

big_on_two_small_on_big.jpg

two_small_on_big.jpg

tray_v_2_2.jpg

Added more steps for stacking convenience. Placement of steps is designed so that it supports smaller trays.

v2.2 - convenient stacking with support of small ones

1727555422090.jpg

1727555433634.jpg

With the edges 4mm below the model has more predictable total height. Edges are embedded into inner wall so the structure should be strong and robust enough for this print. First basket - 62mm Every other adds 58mm to the sum. Of course it stacks automatically on v2

v2.1 - Stackable with edges 4mm below top

IMG_20240902_194911.jpg

koszyk_kremy_stackowalny.jpg

Tweaked original model to make it stackable with kept space inside and easy stacking. I hope you like both versions.

v2 - Stackable !

v1 - wider top

koszyk_kremy_adapter.jpg

IMG_20240902_210522.jpg

Adapter to stack v1 on v1 or v2 on v1 v1 on v2 stacks by default

bottom adapter to stack on v1

Freedom_to_Roam

IMG_3956.jpg

IMG_3957.jpg

This is Kroduk's design. &nbsp;All I did was expand it to 250mm using scale (uniform) to make it bigger. &nbsp;And then beefed up the walls to 6 loops and the top and bottom to 3mm, and 20% infill. &nbsp;I don't know if this is worth almost trippling the weight; it prints at 188g of PCTG. &nbsp;But I wanted sturdy for my garage. &nbsp;Also, makes it a 9 HOUR print. &nbsp; All in all, like I said, may not be worth the extra filament. &nbsp;at $30 a kg of PCTG, makes it cost almost $6, meaning would be cheaper to buy a pack of baskets. &nbsp;And can only fit one per build plate. &nbsp;But if you want bigger and beefier of this excellent basket by Kroduk, this is it. &nbsp;*LIDS etc WILL NOT FIT, because of scaling it up. You can try scalling them up the x or y (I forget which) dimension to 250mm, but it will probably be off and need tweaking, because what I tweaked was the total dimension, which is outside *** I am trying to figure out how to post as a Remix. &nbsp;If this posts separately, I will take it down, because I want Kroduk to get credit for design ***** good design basket by Kroduk. &nbsp;Probably excessive beefups &nbsp;are by me, so flame me if they are dumbly excessive! ***

0.2mm layer, 6 walls, 20% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you for your kind support and every download bringing popularity to my project :)</boostcontent></boostme>UPDATE 04 NOV 2024 As asked by one of the commenters, I&#39;ve created <a target="_blank" href="https://makerworld.com/en/models/758313" rel="nofollow noopener">Lid for Hex basket / tray / bin | stackable !</a> to V2.X baskets because it was quich and easy to make. Two thicknesses in three variants to choose, one plain variant to let your creativity do the job. I will prepare also V1 if requested in comments. <a target="_blank" href="https://makerworld.com/en/models/733465" rel="nofollow noopener">Small Hex basket / tray / bin</a> will also receive lids this week. Hope you enjoy :) ------------------------------------------ UPDATE 26 OCT 2024 v2.2 was posted which features: - steps in the corners sloped from the bottom, so there are less overhangs for crucial area - added steps in the middle for convenient staking of these trays, also sloped from the bottom- steps in the middle are usable also to stack newly introduced <a target="_blank" href="https://makerworld.com/en/models/733465" rel="nofollow noopener">Small Hex basket / tray / bin</a> In the new, “small” model, there is a v1.1 which supports stacking “big” on two “small”. ------------------------------------ Plans for upcoming future: - lower tray models (big and small) - tray section divider insertable to printed models, compatible with stacking feature UPDATE 28 SEP 2024 Prepared an upgrade for v2 model - v2.1 with steps in the corners which limit the fall of one basket to another. This has pros and cons for the whole model, but it&#39;s good as an option. Pros: - stacked height is predictable - storage space is constant and known from the startCons: - you need to aim the basket well to stack properly - usage is not so convenient like without stops ofc it follows the same stack rule as v2 described below. Hope you enjoy :) ================================================= UPDATE 02.09.2024 I&#39;ve prepared v2 for the boxes and made them stackable by default ! Also in order not to leave anyone who already printed v1 unsatisfied, I&#39;ve prepared an adapter to make v1 stackable as well ! adapter helps to stack v1 on v1 v2 on v1 v1 and v2 stacks on v2 by default :) Hope you enjoy it and thank you for all the downloads &amp; boost so far :) =================================================== Yet another hex basket.  Dimensions [mm]: bottom inner: 176 x 78 top outter:      v1: 190,5 x 90,5     v2: 185 x 85 Height: 62 Basket designed to keep baby creams which come in tubes together in one place. It fits few 100g tubes and it&#39;s tall to have it stable and less accessible for the toddler. Maybe someone finds different usage for it.

Print Profile(6)

Description

Comment & Rating (88)

License

Related Models