Search models, users, collections, and posts
Reusable Spool
IP Report
Print Profile(2)
3 plates 0.2mm layer, 2 walls, 15% infill
Designer
3.9 h
3 plates
2 plates 0.2mm layer, 2 walls, 15% infill2
Designer
3.7 h
2 plates
Open in Bambu Studio
Boost
17
40
4
2
8
5
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
.png)
Bambu Filaments
Select all
List other parts
- cardboard spool x 1: I used an old elegoo one
- flathead screwdriver x 1:
Description
This model turns your disposable cardboard spools into reusable ones!!
- First get print all the pieces and get all the tools that you will need (see BOM below⬇️). (The reinforcement piece is optional but is recommended)
- Run a file around the thread to get rid of access filament and stringing.
- Take your cardboard spool and pull off both sides.
- Put the aligning tool centered on it.
- Use the precision-cutter to trace the aligning tool.
- Then line up the center, cardboard spool, (reinforcement piece), and the screw.
- Take a flathead screwdriver and screw in all the screws. repeat steps 4-7 for the other side.
- Take your refill roll line up with the notch.
- Then take the other side and screw them together.
- finally, you can put it on your ams or external spool and enjoy!!
Boost Me (for free)
I worked hard on this, and your support will be appreciated!!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)