2" Pump Thread Adapter

🛠️ Modular Hose -  2 Pump Thread Adapter

This modular set allows you to easily connect hoses to submersible or other types of water pumps using interchangeable top connectors with hose barbs. You only need to print one base, and then swap the upper parts as needed for different hose sizes.

✅ Included Components:

• Swappable hose barb connectors for the following hose sizes:
  • Ø 10 mm → hose barb – for DN10 hoses (e.g. small garden or low-flow water lines)
  • Ø 12 mm → hose barb – for DN12 hoses (e.g. small pumps, indoor water use)
  • Ø 14 mm → suitable for 3/8" – 1/2" hoses
  • Ø 16 mm → for 1/2" hoses
  • Ø 19 mm → for 3/4" hoses
  • Ø 20 mm → loose fit for 3/4" hoses
  • Ø 25 mm → for 1" hoses
  • Ø 32 mm → for 1 1/4" hoses
  • Ø 50 mm → for 2" hoses
  • Quick-connect version – compatible with standard garden hose quick couplings (e.g., Gardena)

• Y-Splitters and Quick Y-Connector: Y12 mm, Y14 mm, Y16 mm, Y19 mm, Y20 mm, Y25 mm

Compatibility:

This product is fully compatible with my previously released Modular IBC Valve Hose Adapter Set. You can mix and match connectors across both systems.

and

This product is fully compatible with my previously released Modular Hose Adapter System for Water Pumps. You can mix and match connectors across both systems.

and

This product is fully compatible with my previously released 1 Pump Thread Adapter. You can mix and match connectors across both systems.