AMS lite Case

Drying box for AMS lite

 

You will need

2x wooden board 220x270x16mm

1x wooden board 220x542x16mm

 

2x Plexiglas sheet 520x268x (1-3mm)

1x Plexiglas sheet 520x218x (1-3mm)

 

2x M5 threaded rod 500mm long

34x screw 3.5x16

8x screw 3.5x40

 

wood drill bit D14, Plexiglas drill bit D4.2

 

Sealing tape (make pliable with silicone spray or talc)

https://www.amazon.de/Dichtungsband-T%C3%BCrdichtungen-Abdichtungsband-Dichtungsstreifen-Dichtungsgummi/dp/B0BXP2T3PT/ref=sr_1_4_sspa?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=39T5ZPU8RCLH5&dib=eyJ2IjoiMSJ9.AtrUWOFHSUqXlqJyAcWcTfvhQQ9DQV6_lAPaH_Xh-f8bBMC4F-ckJJTEETKr2EmrtpsBFObOZ2dbyjQb0XAYJey7zLNGyUxElKx7Qk5DdsJWKe68PNxGaFQian3m8gB1OHESCWL5HlhFOWSSoNdtJ7vftGrmaCcyMwt9o_cNR77j2MN8P9FVQVaV8OVkg7Qyq2LxR4C3wgVopuy358qKB4cAyMJPOVfdxn_fcbEw2tDOroyGXieLg5tBJC2B5buZS7dfvS2PeY4N9j1sbUx6WKaV9AwSNOe14vPBQ1VmTfk.j7TX9HjIYzC0T4_W2myizoiD3ZZVN9_KH9rfPCPk-E4&dib_tag=se&keywords=dichtband&qid=1761394099&sprefix=dichtband%2Caps%2C97&sr=8-4-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

 

AMS wall mount

https://makerworld.com/de/models/243246-ams-lite-wall-mount-bracket#profileId-2013221

 

 

 

 

 

Assembly:

 

First, mount the upper housing parts on the small board

Then, finish assembling the housing with the printed dowels

Screw the M5 threaded rods into the front long holes with a cordless drill to make the housing stable

Preferably, make a slot beforehand with a hacksaw so that the rest can be screwed in with a flathead screwdriver

Then mount the bottom board

 

Now mount the AMS centered on the back board and drill a 14mm hole for the cable

(A plug can be printed for it later I will upload it soon)

Now thread it into the housing and screw it shut

Holes can be pre-drilled with the included template

Mark holes for PTFE tubes and drill D4.2mm

Stick on seals, thread in Plexiglas and be happy :)

 

I used 3mm Plexiglas but I think 2mm is ideal

 

I would appreciate a boost, like or comment :)