The Corny Prints

cover

Twerking_Skull_V1.jpg

16e52dcc-23c9-4a60-b53e-7bbc3aed8d47.jpg

e85f2032-81e5-47a5-8a3d-d1864385343e.jpg

cacfacb5-4ad7-4ab6-95ca-485521bdd388.jpg

plate_1.png

3fddf756-c66a-4848-9f1f-31200e80ea50.jpg

4f930224-6322-4f3d-be0b-9c7ed8e63792.jpg

ce902423-ce59-4532-8efa-d256910f2346.jpg

<h2>💀 Twerky Bones — The Skeleton That Shakes It!</h2>Printer: Bambu Lab A1 Filament: Bambu PLA Matte White Nozzle: 0.4 mm Estimated Time: ~2 h 7 m Filament Usage: 9.08 m (28.83 g) Cost: ~$0.72<h3>⚙️ Print Settings</h3><figure class="table"><table><thead><tr><th>Setting</th><th>Value</th></tr></thead><tbody><tr><td>Layer Height</td><td>0.2 mm</td></tr><tr><td>Walls</td><td>2</td></tr><tr><td>Top/Bottom Layers</td><td>4 / 4</td></tr><tr><td>Infill Pattern</td><td>Grid</td></tr><tr><td>Infill Density</td><td>15 %</td></tr><tr><td>Line Widths</td><td>Default 0.42 mm • Outer 0.42 mm • Inner 0.45 mm • Top 0.42 mm • Infill 0.45 mm</td></tr><tr><td>Supports</td><td>✅ Tree (Auto)</td></tr><tr><td>Threshold Angle</td><td>30°</td></tr><tr><td>On Build Plate Only</td><td>✅ Yes</td></tr><tr><td>Remove Small Overhangs</td><td>✅ Yes</td></tr><tr><td>Bed Adhesion</td><td>Skirt</td></tr><tr><td>Cooling &amp; Speed</td><td>Standard A1 defaults</td></tr><tr><td>Seams</td><td>Rear-aligned</td></tr></tbody></table></figure><h3>🧠 Print Notes</h3><ul><li>Printed upright with tree supports for easy removal around the arms and legs.</li><li>The skirt adhesion provides a clean base and consistent flow start.</li><li>Model prints perfectly at 100 % scale — smaller versions (≈ 50 %) tend to fail due to thin bone structures and weak joint connections, so not recommended below full size.</li><li>No filament swaps required; ideal as a single-color print.</li><li>AMS users can add flair with bone/body color variation if desired.</li></ul><h3>✅ Results</h3>Successfully test printed on Bambu Lab A1 using Bambu PLA Matte White. Clean surface finish, sturdy limbs, and minimal cleanup required after support removal.

Twerky Bones A1 Profile — 0.2 mm Layer, 15 % Infill

Meet Twerky Bones – the silliest skeleton to ever rise from the grave! This fun 3D model captures a goofy skeleton mid-twerk, bringing humor and spooky vibes together in one hilarious display piece.Perfect for Halloween, desk decorations, or just as a conversation starter, this model is designed to bring a grin (and maybe a groan) to anyone who sees it. Print it, paint it, and let Twerky Bones dance his way into your collection!

Twerky Bones

ASIA

Print Profile(1)

Bill of Materials

Description

Comment & Rating (7)

License

Related Models