Search models, users, collections, and posts
ELFA Case (Magnetic)
IP Report
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
2.1 h
1 plate
0.2mm layer, 2 walls, 15% infill
1.9 h
1 plate
Lid for Elfa Turbo, 0.2mm layer, 2 walls, 15% infill
31 min
1 plate
Open in Bambu Studio
Boost
69
158
56
23
300
208
Released
Description
This is a ELFA-Case with a pod storage.
I printed it with PLA-CF and a layer height of 0.2mm, the wall speeds were set using a height range modifier (150/200).
No supports were needed.
You need 4 5x3mm magnets, two for the lid and another two for the bigger base. The pod storage just slides into the case.
-This is my first version of this case so feel free to share some ideas/improvements-
*Let me know if you want a fuzzy skin version
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (56)