I printed it in pla on my p1p, Centauri carbon, and sovol sv08. When I put it in my bag originally it fit well, but when I picked my bag up the bottom ended up folding causing my discs to not fit correctly. I ended up cutting a piece of wood to fit the bottom of it. I glued this model to the wood and put it in my bag. The divider now works very well. Some of my discs are a bit thick for the slots. My putter is pushing it but fits. I have one junky midrange that I found that is too thick, but fits in between the side of my bag and the divider. Overall it’s a great model and would be five stars if the bottom didn’t fold and if I didn’t have to glue some of the dividers into their slots. That could be a printer issue because on the half of it that was printed on my p1 they fit snugly, but on the half printed on my sv08 they needed to be glued in. Thank you for this model.