vic liu

Nice design, love it!
Under the ethernet port could use a small relief so it's easier to release the locking tab.  Four of the six holes in Object 3 don't go all the way through, making them unusable unless you drill them out.

adm.bing

SVCprints

0.16mm layer, 2 walls, 25% infill

The printed very nicely, although it took me quite a while to work out how it went together. Some of the screw holes did not go all the way through though so had to drill those out. Minor issues aside this is a nice and different case.

StampyDriver

Nice Project!

A slightly remix for only use rutex whould be nice. Cause of no assembly description I reopend it e times. This cause a plastic failure because of the selftamping screws

Storm Wolf

Xstrick

jimbeamonice

Fits well. I drilled all holes to use M3 Screews.

Filament: 
BambuLab PLA Basic Red
BambuLab PLA Tough Black
extrudr BioFusion Arctic White

Clay2F

Mc_Diva

Sieht super aus, einfach zu drucken. Der zusammenbau war ein bisschen kniffelig. Vielen Dank für dieses Modell

Looks fantastic, easy to print Assembly was a little fiddly Many thanks for this model

Pascal

For A1 mini, 0.16mm layer, 2 walls, 25% infill

squirrelbrain

cover

PI4CASE0.2_fb049f42-d139-42ae-8ac4-aa875818cbd4.png

2024-07-11_96003b018e85b

_(1).2024-07-11_da6839042d981

IMG_6450.jpeg

plate_1.png

plate_2.png

Harald Bruns

f54b886e-0f18-4bbe-a90d-b72f503b5859.PNG

inttagram

30 mm fan remix for the excellent Rapsberry Pi Case from <a target="_blank" rel="noopener noreferrer" href="https://makerworld.com/en/@squirrelbrain">squirrelbrain</a>. Original design is here: <a target="_blank" rel="noopener noreferrer" href="https://makerworld.com/en/models/99946#profileId-457041">https://makerworld.com/en/models/99946#profileId-457041</a>To use your 30 mm fan, just print this one instead of the original in that design.

30 mm Fan Top Part (0.16mm layer, 3 walls, 25% infill)

&nbsp;U will need: <ul><li>Case - M2.5x10 self tapping screws X13</li><li>Pi - M2.5x6-8 self tapping screws X4</li><li>Mounting Case - M5x10 BHCS or SHCS X2-4</li><li>4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4</li></ul>No supports are needed for this design.Red faces can be removed for wire/ribbon access (see 3MF)

Print Profile(2)

Description

Comment & Rating (78)

License

Remixes (1)

Raspberry Pi 4 Case Remix - Top Panel Fan Grill

Related Models

Raspberry Pi Snap Standoff

Raspberry PI CRT TV Style case

Raspberry pi 4 STAND

Cylindrical case Raspberry Pi5 model WSS ver. 1.0