Modified Sliding Vent Glass Top Enclosure with ESP8266 and WS2812 LED Strip.
- Forked from ktothestank 's design and thanks for his good design.
- I modified the rear left part only based on his (N) Version parts and fixed one ESP8266 board on it.
- Power supplied by one USB cable with switch.
- Codes is based on WS2812FX library and just setup your network and IO Pin.
- You can control the LED strip through webpage to change color or play 55 different effects or customized effect through your codes.
Material used:
PETG transparent is good for different color show.
Diffusers must be transparent materials.
Settings:
Recommended:
- 0.2mm layer heights,
- 3 walls,
- 10-15% gyroid infill,
- 4 T/B layers,
- 75mm/s outside layer speed for better appearance
WS2812 library:
https://github.com/kitesurfer1404/WS2812FX
Basic codes:
https://github.com/kitesurfer1404/WS2812FX/tree/master/examples/esp8266_webinterface
Other materials:
- ESP8266 dev board
- USB power cable (with Switch is better)
- Prototype board (7*3cm)
- M2 screws X 4
- USB Socket
- Cables
- WS2812 LED Strip: 5V, 10mm Wide, 30 pcs/meter, adhesive peel-off backing
- Felts (1mm thick) adhesive peel-off backing