Modular Mosspole 40MM for all your climbing houseplants (Fill with sphagnum mos) by Makerspace.Online

Makerspace.Online

Household>Garden

Print Profile(5)

All

P1P

P1S

X1 Carbon

X1E

Mosspole 1x extention - Open structure - 0.16mm layer, 2 walls, 15% infill

Designer

4.4 h

1 plate

5.0(6)

Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill

Designer

5 h

1 plate

4.6(11)

0.16mm layer, 2 walls, 15% infill

Designer

7.8 h

1 plate

5.0(1)

Mosspole 40mm Closed structure - 0.16mm layer, 2 walls, 15% infill

Designer

5.2 h

1 plate

Click to see more

Boost

174

188

164

Released

Description

A 3D printable modular mosspole that can be filled with sphagnum mos.

It exists of 4 pieces.

1. Mosspole with closed structure in the back (to keep moist in for longer)
2. Mosspole with open structure, for more aerea for plants to grow in
3. Groundpin
4. Top cap

Additional parts can be printed to extend the length of the mosspole!

Need a thicker / bigger mosspole? Check out my 60mm mosspole in the link below!
https://makerworld.com/en/models/148232

NOT FOR COMMERCIAL USE!!

Comment & Rating (26)

@Beefman

Boosted

Thank you very much! It turned out great! 🌱 Possible suggestion: Add a top cap with the possibility to screw on a 0.5L PET bottle for watering it. =)

The designer has replied

@Makerspace.NL

thanks! will look into adding some additions! like a slow dripping bottole etc. Still need to find the time to add zome additions (also a 40 to 60mm converter and visa versa)

@TopicHopser

Print Profile

Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill

Great 👍

@Ryan.thomas369

Print Profile

Mosspole 1x extention - Open structure - 0.16mm layer, 2 walls, 15% infill

I already printed a few of these, they attach well with each other

@Ryan.thomas369

Print Profile

Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill

Printed great, I haven't tested the strength yet but looks good.

@bomas_ulz

Print Profile

Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill

Wife is happy with it. So am I.

The designer has replied

@Makerspace.NL

Nice one! Thanks for sharing!

(Edited)

@user_3664311853

Print Profile

Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill

Turned out great and looks fabulous. Have already printed more plus the extensions to keep all my plants happy.

@Tobbse612

Print Profile

Mosspole 40mm Open structure - 0.16mm layer, 2 walls, 15% infill

Gedruckt via Handy = Super. Nochmal gedruckt via PC = Fehler.. weiß nicht wo das Problem war. man muss vorsichtig sein beim Druck. 166% Schnelligkeit macht der Turm nicht mit. Wackelt und fällt um. Maximal 100%. Auf die letzten Schichten besser nur 50

@larrry

Boosted

Thanks!

@Firebugjohn

I wish you had this in a 1" diameter. Every time I try to scale it down it prints very fragile and breaks when I try to screw it together. If you can make one that's strong in 1" diameter that would be awesome. Id even pay you for the file if that's what it took. My neighbor loves this pole but 1.5" diameter is too big for her. Would also love it if the drain hole on the funnel was bigger. Maybe double the size it is now.