Jurassic park badge (fan art swap at layer height)
Jurassic park badge (fan art swap at layer height)
Print Profile(2)
Description
print made using HueForge - Filament swaps ONLY, no mmu/ams required
Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mm
Filaments Used:
PLA Bambu PLA Matte Charcoal Transmission Distance: 0.6
PLA Bambu PLA Matte Scarlet Red Transmission Distance: 1.5
PLA Bambu PLA Basic Yellow Transmission Distance: 3
PLA Esun PLA+ Cold White Transmission Distance: 2.5
Swap Instructions:
Start with Charcoal
At layer #7 (1.2mm) swap to Scarlet Red
At layer #9 (1.52mm) swap to Yellow
At layer #11 (1.84mm) swap to Cold White for the rest.
This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results. (the white needs be really opaque) matte filaments work best
Use the exact numbers in your slicer to match up properly.
Two different size models are supplied and designed to print with 0.4 nozzle
**If Scaling the model make sure not to adjust the Z-Height of the model**
ALL of Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.
Comment & Rating (24)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
