Self Levelling Guitar Wall Hanger by Zurlingo-3D

Zurlingo-3D

Hobby & DIY>Music

GIF

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

Designer

2.9 h

1 plate

5.0(22)

Boost

121

186

232

Released

Description

A self levelling wall hanger for guitars, basses and other stringed instruments.

Simple to mount, stylish and super sturdy, this is the perfect solution to display your instruments.

It is a universal fit, and should work with 99% of headstocks spanning most manufacturers.

Installation:

Fix the 'Wall plate' to the wall using two 4mm diameter screws.
Line the centre of the 'Hook' piece up, with the centre of the 'wall plate'
Push the 'Spindle' through both holes until it sits firmly against the wall
Use two 4mm diameter x 16mm length screws (other sizes will fit if close enough) to secure the 'spindle' to the 'wall plate'

Tip: If the hook doesn't spin freely after assembly, then back off the 2 side screws in the wall plate ¼ of a turn each. Also, if you assemble the hanger and spin the hook in your hands, you can ‘wear it in’ for a few minutes to get a really smooth feel.

Print Settings:

Really easy to print.

5 perimeters
20%+ gyroid infill
5 Top and bottom layers
Layer height is up to you.

Any questions just leave a comment below and I'll get back to you asap.

Thank for looking :) - Don't forget to post your makes and review your experience

Comment & Rating (24)

@Demig74

Boosted

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

excellent, really like this. printed several today.

The designer has replied

@Zurlingo3D

Thanks for printing! :) It looks perfect!

(Edited)

@Ryan14

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

I have been looking for a good hanger to put some acoustic guitars up around the house. I was a little nervous with it not showing any in the pictures but works great and have one hanging will print more for the others! Thank you for a great design and sharing with us!

@3dprinting4silv

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

very cool idea. the print cam out perfect. I was a little worried about the print angle for the u shape that holds the neck but it works great and holds the weight of the guitar fantastic.

@Mike770502

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

A bit hard to screw in the side screws but works and holds perfectly

@Min3R493r

Was very happy with the fitment and strength! my daughters smaller guitar fit perfect as would my full size! need 2 more for bass and electric Thanks!!!! ENDER 3 PRO with S1 extruder custom job with new ceramic super fast hot end fast print adaptive layers (cura slicer) .4 nozzle .28 height .6 width 6hour print 100%infil 80mm/s (4 hour estimated 20% gyroid 5 Lay/wall) (Store bought one on right)

@skelly31489

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

looks great, works great. printed in silk PLA, no durability issues

@Adherant

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

Printed well! decent design.

@builderdad

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

Worked perfect thank you for the work on this.

@user_1449007755

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

haven't hung it get but it's a nice design and seems like it's gonna be sturdy

@topsy1133

Print Profile

All Parts, STRONG, 0.2mm layer, 5 walls, 20% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.