Corner Cover for Lamps

OK so as requested I designed this corner cover to go inside the lamp to block the light from coming out of the corner. I do not like my lamps having edges, so I put the light blocker on the inside so it's very minimal. This is a very delicate print and has to be printed on its side with supports so that it does not fall or break. After printing please wait a little before you take of the print bed so you don't break it. Starting off you print either the basic corner blocker, or the LED adapter corner blocker depending on if you use the lamp kit or the led adapter. Then after you have it printed out in a dark color preferably black, or the color of the lamp panels you have you slide it in over the lamp and position it so that the 4 post are in the corners.

Then you put the panels in and make sure the post are blocking the corners.

Then put the top on and you have no more to very minimal light leak from the corners.

I used blue so some light still came through.

This model is very thin and requires good bed adhesion so make sure you wipe of your plate before you print.