Nintendo Switch 20 Game Holder & Carousel Remixed by proto_boy

Remixed by

proto_boy

Toys & Games>Other Toys & Games

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

With Logo v2 - 0.2mm layer, 4 walls, 15% infill

Designer

4 h

2 plates

4.9(29)

No Logo - 0.2mm layer, 2 walls, 15% infill

Designer

3.7 h

2 plates

4.8(6)

Open in Bambu Studio

Boost

167

251

246

Released

Description

The model from JamesThePrinter is incredible. After giving this to a friend as a gift, they asked if they could get one for their daughter that held more game cartridges. After a bit of tinkering, it seemed that it was possible to double the slots. So, that is what we have here. The same principle as the original just with more slots.

Both a Logo and No Logo Profile are available.

Assembly

You will need 1 x 608 bearing. These are the ones I used. They push fit perfectly on my P1S.

Push-fit a 608 bearing into the center opening in the base.
Put a dab of glue on the spring and insert the tab end into the opening on the inner base circle.
Insert the top into the base aligning the spindle with the bearing opening in the center.

Buy the original designer a coffee!

Comment & Rating (42)

@Pluthorium

Print Profile

With Logo v2 - 0.2mm layer, 4 walls, 15% infill

Worked out great. Only thing Im wondering about is how to make these 2 parts stick together.

@D44rkM00n

Print Profile

With Logo v2 - 0.2mm layer, 4 walls, 15% infill

Un diseño genial, incluso imprimiendo un rodamiento funciona perfecto.

@djsente

Print Profile

With Logo v2 - 0.2mm layer, 4 walls, 15% infill

awesome print, came out great and works well. I added bearing I bought to go along with it

@EricEJ

Print Profile

With Logo v2 - 0.2mm layer, 4 walls, 15% infill

My friends love these. Made some as gifts.

(Edited)

@Hodzinets

Print Profile

No Logo - 0.2mm layer, 2 walls, 15% infill

Works like a charm

@Rahrah

Print Profile

With Logo v2 - 0.2mm layer, 4 walls, 15% infill

We have so many games and no easy way to contain them perfect fit for all the parts and bearings. looks amazing. (subbed the gray base for more white for a pokemon feel)

@Twinkletoes

Print Profile

With Logo v2 - 0.2mm layer, 4 walls, 15% infill

printed flawlessly. just have to wait for the bearing to arrive to complete it!

@Beardeddude916

Print Profile

With Logo v2 - 0.2mm layer, 4 walls, 15% infill

Works perfectly, my kids needed it. Thanks for sharing!

@user_4154595693

can you 3d print the 608 bearing will it work the same?

The designer has replied

@proto_boy

I have not tested it, however, I have gotten messages from others who have printed the bearing and reported that it worked well.

@ClaudioSZ96

Print Profile

With Logo - 0.2mm layer, 2 walls, 15% infill

The designer has replied

@proto_boy

Thanks for rating! Can you share what issues you had with the print? I have printed it several times and have had no known issues. Thanks!

(Edited)

@ClaudioSZ96

Replying to @proto_boy :

The big red piece prints it only half on the plate and the other in the air. Tried to slice it in the studio of bambu lab but never worked. It would be a beautiful holder

@proto_boy

Replying to @ClaudioSZ96 :

Thanks for the heads up on this! It looks like I uploaded the wrong 3MF. I have removed that profile and added a new one that slices correctly titled "With Logo v2." I hope that works out for you and I apologize for your issues.

(Edited)