Alexey Skobkin

cover

PXL_20250213_214502067.jpg

2025-01-02_w3192jmbqegx.jpg

2025-01-02_dqhyvv22j4ju.png

2025-01-02_tquw3fk7beyc.png

2025-01-02_ubwz29zvorz5.jpg

2025-01-02_5j84siz8j7i4.jpg

v1.3 slim horizontal with supports

plate_1.png

v1.3 slim vertical (recommended)

plate_2.png

v1.3 slim on the side

plate_3.png

This is updated version which is thinner and has even more holes which results in less filament used and case being less bulky.&nbsp;Front and back holes are less strong in this version, check if they&#39;re strong enough after printing or use the side holes.&nbsp;This is not very easy to print model, so I recommend printing it vertically lining it up with the bed motion (if you use bed slinger) and using supports. But you can also try other orientations which may be more stable in your specific case.I marked up preferred support points, but you can customize it as you see fitting.

V1.3 slim, more holes

PXL_20250101_200554245 (Mastodon).jpg

PXL_20250101_200917230 (Mastodon).jpg

<ul><li>Large outer brim</li><li>Ironing</li><li>Thick bridges</li><li>Thin walls with infill</li></ul>I recommend using glue stick for better adhesion.

V1.2 0.6mm nozzle, 0.3mm layer, 1 walls, 10% infill

<h2>Summary</h2>This case allows to wear your Trezor Safe 5 on a neck rope. &nbsp;Version 1.0 doesn&#39;t have any additional holes.All version have two pairs of holes for the neck rope: front+back and left+right.&nbsp;<h2>Printing</h2>I recommend to use glue since there&#39;s a chance of the model getting off the bed on the latest stage of printing.

Trezor Safe 5 neck rope case

ASIA

Print Profile(2)

Description

Summary

Printing

Comment & Rating (6)

License

Related Models