SpaceX - STARSHIP AREA - Build Kit by jakubhroch

jakubhroch

Toys & Games>Other Toys & Games

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

v2 print profile

Designer

26.5 h

7 plates

4.6(20)

0.2mm layer, 2 walls, 15% infill

Designer

28.6 h

9 plates

4.0(2)

0.2mm layer, 2 walls, 15% infill

Designer

11 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

170

286

504

536

Released

Description

SpaceX STARSHIP ARE Build Kit 1:200

Total high 69cm

Glue is necessary

Include:
Starships - 5 parts
Booster 7 - 10 parts
Pad - 5 part
Mechazilla - 89 parts

Pins needed -

3x 5mm pin
12x pillar pin
8x 10mm pin

Printer profiles ready

v2 print profile

Better parts orientation
Ship and booster parts shorts by color
exact number of pins

spacex

starship

build kit

Comment & Rating (51)

@djbunkerking

Just got done printing this, turned out awesome. I had one failure printing plate 8 standing up, layed them down and reprinted. The Mechazilla arms printed, but the support arms coming from the bottom turned out pretty bad. Definitely could be my printer and I used PETG,may reprint them using PLA. If I did it again I may use Silver PLA Silk on the white parts to add some color. Awesome model great work jakubroch8!

The designer has replied

@jakubhroch8

Thank you, awesome print!

@mikew9788

I used silver silk on the rocket and it is sick. Its reflective and looks like the real thing.

@Jamesyamato12

Print Profile

v2 print profile

I just had to cancel

(Edited)

Bed Adhesion Issue:ok it’s not meant to look like that it KEEPS HAPPENING it knocks the print over

@Jamesyamato12

THEY KEEP FALLING OVER

@Jamesyamato12

now look

@user_265205218

what plate is this happening? I want to print it also, so I want to make sure that I fix this miss print. And if you have problems with your adhesion then the bed temp is too low or too high for the used filament. You can also use a 5 or 10 ring brim for extra adhesion. You can also buy 3d-lac for better adhesion.

@NicNakPrints

Print Profile

v2 print profile

Fun to print looks awesome

(Edited)

@ParzivalIOI

Print Profile

v2 print profile

obligation d'arrêter l'impression décollement des pièces imprimer

(Edited)

@ToastyBuns

did you end up resolving this? I failed 5 times with the same issue.

@ToastyBuns

as-tu fini par résoudre ce problème ? J'ai échoué 5 fois avec le même problème.

@ShawnPDaddy

Boosted

Just finished and it turned out amazing! I used Overture silver silk and black PLAs. And for assembly, I used Gorilla gel glue. Not my favorite glue, but it is what I had on hand and it worked just fine. I printed on A1 and I had to move the elevator supports (the parts that have pins) and the fins to their own plates and print with brims as that plate failed twice. I also wish there were assembly instructions. However, just a fantastic model. Great job!

(Edited)

@nightshade_

Boosted

Printed that a while ago. Very very cool!

@Phillatoros

Boosted

I love it, thank you! used silver silk pla and black pla.

@nightshade_

Boosted

Print Profile

v2 print profile

Beautiful model, i sprayed it in a metallic look after printing

@hanksarcadelab

are there instructions? pins to hold things together? do I glue it? printed it all and am lost. p.s. don't print plate 8 with pets. it falls over every time I tried(3).

The designer has replied

@jakubhroch8

New print profil. Try it.

@djbunkerking

I printed plate 8 laying down after my first failure with PETG. Worked good.

@bnolse

How many of each connector piece are needed ? I Just finished printing everything and I'm planning on giving it to my nephew later today as an extra christmas gift. He lives abroad so it will probably be assembled at home where i can't print parts on demand.

The designer has replied

@jakubhroch8

updated