D2 - Thorn
Remixed by
Copyright Claim
D2 - Thorn
Remixed by
Boost
47
86
16
Print Profile(1)
0.16mm layer, 2 walls, 8% infill
Designer
17.8 h
4 plates
Open in Bambu Studio
Boost
47
86
16
4
138
153
Released
Description
I thinned out the connection points on the receiver to allow for a smooth connection with little filing needed.
GCode files are for a 88% model size to make it fit on my Ender 3
Comment & Rating (16)
All
Boosted
raw print no paint. gear chamber is off center on original file. I redesigned it on a different print to center it.
2
Reply
Beautiful. Is it possible to upload the profiles you used, including the stand?
1
Reply
please can you upload the file
1
Reply
Boosted
Replying to @Mrniceguy1105
I am sorry I never saw this I didnt think it would get a reply. I uploaded what I had I hope i did it right i never uploaded before I am sorry if it is too late. check the remix for this item.
0
Reply
Print Profile
0.16mm layer, 2 walls, 8% infill
fantastic print
1
Reply
Hi, i just saw your model because my little brother loves D2 and i want to print this pistol for him. I have a K1 and you can print it on an ender3/K1 at 100%(same build volume on both printers) scale if you slightly give it an angle and only add manual support on few spots to hold it during print. I tested this by trying the original one on printables. Just wanted to let you know if you didn't. this picture is just a quick dirty auto support to see how many it would generate but i would advice only bottom and on the side that is leaning down to support the weight.
0
Reply
Print Profile
0.16mm layer, 2 walls, 8% infill
Printed great thanks!
0
Reply
Boosted
love it
0
Reply
Print Profile
0.16mm layer, 2 walls, 8% infill
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 8% infill
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 8% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 8% infill
0
Reply
No more
Remixes (2)
Related Models
© 2024 MakerWorld