打印方式
使用100%充填,0.08层高,0.16首层打印
最开始使用黑色
在#4 (0.4mm)切换成蓝色
在#7 (0.64mm)切换成湖蓝
在#10 (0.88mm) 切换成白色
耗材使用
PLA Kexcelled Black Transmission Distance: 0.2
PLA Kexcelled Blue Transmission Distance: 3
PLA Kexcelled Lake Blue Transmission Distance: 3.6
PLA BambuLab Basic Jade White Transmission Distance: 5
不同的耗材会引入色差。
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kexcelled Black Transmission Distance: 0.2
PLA Kexcelled Blue Transmission Distance: 3
PLA Kexcelled Lake Blue Transmission Distance: 3.6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Blue
At layer #7 (0.64mm) swap to Lake Blue
At layer #10 (0.88mm) swap to Jade White