Filament Spool Meter
Print Profile(2)
Description
*** NEW VERSION 4.0 - convenient, front readable ! ***
How much filament remains on your spool ? 200 or 400 g ? (*)
Simply use this perfectly calibrated meter to estimate the remaining filament. Optimized for Bambu Lab spools, available in :
- Single Scale (Standard, best for PLA/PETG/PC/TPU)
- Dual Scales (One on each side, for various filament types) :
- Standard (PLA/PETG/PC/TPU)
- ABS / ASA (12.5 % difference)
Available plain or with holes of 20/15/12/10/9/8/7 mm for magnet or hook.
As shown by the pictures, faced down numbers were made deep enough for a textured build plate; a smooth plate will give even better results.
Also have a look at tiger.49 Ikea Skadis holder !
Note on magnets : holes were designed with the exact specified dimensions, but manufacturers may slightly differ from the exact sizes.
(*) Scale indicates the remaining weight in 100 g. For example, 2 stands for 200 g, etc.
(**) There is also a Spool Meter Version 3.0, slimmer, with Dual or Single Scale
(**) There is also a Spool Meter Version 2.0, with Dual or Single Scale
(**) There is also a Spool Meter Version 1.0 with single scale optimized for PLA
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (257)