Grinch-ie Love - Something sweet to add to your Christmas Decor and bring some romance back into Christmas

Print Time 4 hrs 12 min

P1P/ Bambu Basic PLA in CMYK Colours (Total of 4 colors used)
DEFAULT PROFILE IS NOT SET UP TO CREATE WITHOUT AN AMS but i am sure it is possible
I use Other filament but Bambu Basic PLA Profile (Sunlu PLA+ white, Bambu PLA Magenta, Sunlu PLA+ yellow and Sunlu PLA+ light blue)

Aux fan is OFF (if using one)

Settings are taken from https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions%20

Lithophane created with https://lithophanemaker.com/Color%20Lithophane.html?fbclid=IwAR0zbiYVOGT2kV0MY4LtLbNk5rrg_wOd_bEsA2kpnxebZCTbBNzPyFu8h7g.#processing

First Layer .1mm
Other layers .15mm
Classic walls
2 wall loops
3 top shell
3 bottom shell
100% rectilinear
Speed: Slow Down For Overhangs is Turned off
Prime tower enabled
Brim/Bed Adhesioin: None Needed
Flushing set for .65 (you will need to adjust this for your filaments and machine type)