Imperator_1972

cover

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_1.webp

plate_2.webp

plate_3.webp

plate_4.webp

Filament: Bambu ABS Grey and Bambu TPU95A Geen

0.24mm layer, 2-3 walls, 25% infill

Peakpoke

P1S / X1C AMS raiser with led (old and new AMS)

Hello Bambulab owners and 3D printing community! I have here a remix to Peakpoke`s P1S Riser with LED without the AMS Riser part. I personally and also those who are a bit into physics know that the AMS does not belong on the printer. Therefore I have changed the design of Peakpoke so that there is only an extra lighting and a slight increase in the height of the printing area. I don't have any print profiles as I haven't printed the part myself yet. Many thanks to Peakpoke and Happy Printing&nbsp;Hallo Bambulab Besitzer und 3D Druck gemeinde! Ich habe hier einen Remix zu Peakpoke`s P1S Riser with LED ohne die AMS Riser Teil. Ich persönlich und auch diejenigen die ein bisschen sich mit Physik sich beschäftigt haben wissen dass der AMS nicht auf der Drucker gehört. Deswegen habe ich den Entwurf von Peakpoke so geädert dass nur eine extra belechtung und eine leichte Erhöhung der Druckraum höhe entsteht. Druckprofile habe ich keine noch da ich das Teil noch nicht selber gedruckt habe. Vielen Dank an Peakpoke und Happy Printing

Hello Bambu Lab owners and 3D printing community! I have here a remix to Peakpoke's P1S Riser with LED without the AMS Riser part. I personally, and those who are a bit into physics, know that the AMS does not belong on the printer. Therefore, I have changed the design of Peakpoke so that there is only an extra lighting and a slight increase in the height of the printing area. I do not have any print profiles as I haven't printed the part myself yet. Many thanks to Peakpoke and Happy Printing&nbsp;Hello Bambu Lab owners and 3D printing community! I have here a remix to Peakpoke's P1S Riser with LED without the AMS Riser part. I personally, and those who are a bit into physics, know that the AMS does not belong on the printer. Therefore, I have changed the design of Peakpoke so that there is only an extra lighting and a slight increase in the height of the printing area. I do not have any print profiles as I haven't printed the part myself yet. Many thanks to Peakpoke and Happy Printing

Print Profile(1)

Description

Comment & Rating (17)

This remix is based on

License

Remixes (1)

Related Models

Glas Separation without Riser