Print Profile(2)
A1mini 0.16mm layer, 2 walls, 15% infill
23 min
1 plate
0.16mm layer, 4 walls, 50% infill
26 min
1 plate
Open in Bambu Studio
Boost
23
22
28
1
129
173
Released
Description
Added a loop to the original design. I found the edges a bit too sharp to handle and the loop can give a bit more force by putting your finger in it. The loop can also be used to hang it up.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:123 3D PLA
Category: OfficeComment & Rating (28)
All
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
could be an little sharper but works for the most part
a bit sloppy on the top side with clearly visible edges and not smooth
0
Reply
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
came out perfect, thanks.
0
Reply
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
easy to print
0
Reply
Prints great
0
Reply
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
Nice functional print, with no printing issues. My only issue is that the tip bends a little to easily for my clumsyness. It still works though.
0
Reply
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
Easy print, work great.
0
Reply
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
top surface not great, but does the job
0
Reply
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
A1mini 0.16mm layer, 2 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld