Thor's Hammer-push opener
Thor's Hammer-push opener
Print Profile(2)
Description
Thor's Hammer-push opener
1. Printing is simple, CBDZ printing requires support to be turned on.
2. AM needs a one cent coin, press it all the way to the bottom. Another 8mm diameter and 3mm thickness magnet needs to be pressed into the slot.
3. CMB requires three magnets with a diameter of 10mm and a thickness of 5mm. Simply press into the slot.
4. Glue needs to be added at the connection between CS and CB.
5. The hand rope is made of a 15cm long, 6mm wide, and 2mm thick cow belt with holes at both ends. Thread the hand rope into the two holes of SBDZ and press it into the positioning column. Apply glue to the handle and the base of the handle, then press it tightly.
6. Wait for 10 minutes for theue to solidify, and you can happily play with the Thor's Hammer.
Bill of Materials
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
