Please comment, rate, and post a make!

I have one of these Milwaukee shockwave bit sets (affiliate link) that I wanted to mount to the HSW. Since the size label on the bits themselves is fairly hard to see, I wanted to have the sizes printed on the mount. I couldn't find one so I made one.

I've provided two STLs that cover all of the sizes that come in the kit. To allow for printing the mount flat on it's back without a thousand supports (and making the color change easier), I added some recesses for the HSW pegs. The recesses should print fine just being bridged (no supports). Pick which locations you want to use, print off pegs to go into the recess, and add just a dab of CA glue to lock them in place.

The 3MF was made with Bambu Studio.

These are universal ¼" bit slots, so should work for any bit of that size. I've also provided the Fusion360 model if you want to change out the sizes. The sketch for the size text is the only one named "Text". The model is mildly parametric with parameters for how many bits are in each strip, the lettering size, and the slot size (if you want looser/tighter clearance). The number of peg recesses and overall dimensions should scale with the bit count.

Be sure to check out my other models!