Print Profile(4)
Bill of Materials
Description
Check my crowdfunding project OE OTF RE: Redefine and Evolve
Perfect Christmas Gifts. Simple hourglass clock (Upgrade components to be announced)
Just stack with the clock component kit. (Or just decoration without the clock assembly kit.)
The hour and minute shaft may be updated from time to time. Therefore, always use the latest printing profile.
If you have other clock kit spec, you can give me measurements.
**** Tip:
- Shafts print in spiral vase mode. Quite picky about filaments. If printing fails, try using other filaments. Highly suggest PETG. (PLA is likely to fail) For X1/X1c user, turn off “First Layer Inspection” if you have a bad print at about 2mm from the print plate.
- Shafts are a bit long for machine tolerance. You will need to cut it to fit the hardware.
- Trim the elephant foot of the shafts.
- You can put on a small piece of double-sided tape to get more fiction to the clock kit.
Shafts and couplers V2 setup diagram
With optional stand upgrade
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (42)