Hongdui T-Square MT-2465 Pro Holder

French Cleat & Wall Mount holder for the Hongdui T-Square MT-2465 Pro

• Holds the main T-Square: 2 versions available as separate print profiles
  • French cleat system
  • Wall mount (screw mount)
• Additional integrated storage option for up to 16 drill guide bushings and 4 drill guide sliders
• Review by Hooked on Wood

Printing hints

• Print profiles have been tested with BambuLab PLA Matte 
• Supports come off relatively easily with almost no rework needed; best to pull them out sideways with a plier
• I experienced differences in support removal with different PLA materials. With BambuLab PLA Matte it definitely goes easy, with other brands it was sometimes harder to remove
• For the French Cleat version the updated v1.1 profile is recommended

Update Feb 2, 2025: Added a new optimized v1.1 print profile with several improvements

• 15% lower material consumption and 35% faster printing while improving overall surface quality
• Changed to more typical settings: Textured PEI plate, 0.2 mm layer height with variable adjustments, optimized flow rate for better quality
• Improved support structure with less material and easier removal
• Added brims for anti-warpage

Update May 17, 2025: Added a new Wall Mount profile

• Compared to the French Cleat version the design has been optimized for Wall Mounting, i.e., a thinner design in z-axis to avoid unnecessary material usage and generally closing the bottom area
• Used a low infill amount with Hilbert Curve to avoid warping
• Mounting via 2 flat head screws (max. diameter 5 mm, head max. 10.5 mm)

Please also take a look at my other french cleat designs

• Wera & Wiha screwdriver holder
• Wera Kraftform Micro screwdriver holder
• Narex chisel holder
• Plastic chisel holder
• Plier holder
• Several bench cookie holders
• More to come…