Chrono Trigger Dimensional Mosaic

Based on the incredible work of w3r3wolv3s, I've created a Chrono Trigger dimensional mosaic. Unlike my other dimensional mosaics which will occasionally use color blending to create gradients, this logo is actually made from a HueForge on top of the mosaic, and then the clock portion of the logo is a traditional model with the roman numerals created in Bambu Studio.

This is sized for the A1 Mini. If you have a larger printer and want to scale it up, only scale the x and y axis as it assigns color based on layer height. Since this include a HueForge, do not scale the Z axis or it will not blend the colors correctly.

This is a very long print do the need to print layers at .08mm, it takes over a little over 7 hours. It also uses 6 different colors, meaning you will have to do 2 color swaps. Start off with White, Light Gray, Black, and Red. I recommend swapping the Light Gray for Yellow, and then the Red for Dark Gray. To accommodate these swaps I've integrated two pauses that take place 7 hours into the print and occur 5 minutes apart. My suggestion is to start this print before you go to bed, and when you wake up make the two swaps, that's how I printed it.

Please note, as is the case with all my mosaics, the colors will not appear until you slice the plate, but I promise you they are there.

This is fan art and is not licensed by Square Enix, please do not sell copies of it.

And check my other Chrono Trigger Mosaics as well:

Chrono Trigger - Ayla - Dimensional Mosaic

Chrono Trigger - Crono - Dimensional Mosaic

Chrono Trigger - Frog - Dimensional Mosaic

Chrono Trigger - Lucca - Dimensional Mosaic

Chrono Trigger - Magus - Dimensional Mosaic

Chrono Trigger - Marle - Dimensional Mosaic

Chrono Trigger - Robo - Dimensional Mosaic

Also check out these dimensional mosaic accessories:

Dimensional Mosaic Logo Chain Necklace

Dimensional Mosaic Stand / Holder