Screw and small parts storage container and drawers
Copyright Claim
Screw and small parts storage container and drawers
Boost
112
249
12
Print Profile(1)
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
41.5 h
4 plates
Open in Bambu Studio
Boost
112
249
12
2
371
218
Released
Description
A box with drawers for lots of screws and things.
Print the main case rear downwards and you won't need supports. Wall thickness optimised for a 0.6mm nozzle.
Update: 10/12/23. A few people have had issues with tight clearance of the drawers. I've uploaded a version with much looser clearances.
Comment & Rating (12)
All
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
0
Reply
Boosted
great for storage!
The designer has replied
0
Reply
Cheers. I admit to having a whole bunch around the house. :)
0
Reply
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
ok
0
Reply
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
可以哦
0
Reply
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
(Edited)
0
Reply
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
0
Reply
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
0
Reply
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
0
Reply
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
0
Reply
Print Profile
Uses the large tolerance model and 0.24mm layer for fast print, 3 walls, 15% infill (0.4mm nozzles)
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
© 2024 MakerWorld